What type of motor does the StripMeister E350X have?
The StripMeister E350X features a 1/4 HP 110-240 VAC 60/50hz single phase DC motor with a variable speed controller.
Archives: Topics
How fast can the StripMeister E350X strip wire?
The StripMeister E350 can strip between 70 and 110 feet per minute with the adjustable speed control.
Where can I check the fuse on the StripMeister E250?
To check the fuse on the StripMeister E250 follow these 4 easy steps:
- Unplug the StripMeister E250
- Remove the drive cover
- Remove the 4 M3 screws
- Lift the cover carefully up and on the back side is the fuse
If the fuse needs to be replaced:
To replace the StripMeister E250 fuse you will need a T8A Ceramic Cylinder, Time-Lag, 250VAC/UL/CSA, 5x20mm Fuse (Allied Electronic #70160407). You can find the fuse by clicking this link.
Drive Cover
Back cover where screws are located
The Fuse Location
How to stop the wire from slipping to the side when stripping?
When you are stripping wire if the wire is slipping to the side it is normally not at the correct angle. We have a great setup video to stop the slipping of wire and you can find it by clicking this link.
What type of maintenance is required on the StripMeister E250?
Maintenance
To ensure smooth operation of your StripMeister E250 we recommend a maintenance of the following:
Make sure the machine is unplugged before performing any maintenance
1. Check oil level on the gear box monthly.
Before checking the oil, make sure the gear box is not hot. If oil is visible when the screw is removed from Oil filler hole on the gear box, the unit is still full. If not visible top up with manufacturers recommended gear oil (ISO VG320 or Petro of China CN320) until full.
For gear oil visit website:
http://www.pdblowers.com/pr91-roots-synthetic-lubricant-iso-vg-320-quart.php
2. Inspect blade for damage
3. Inspect and clean Feeder Drive of dirt and debris
4. Inspect whole machine for any loose parts
I recently bought the StripMeister E250 model and was wondering if it came with gear oil already in it or if I had to buy my own before I could use it?
All of our machines come ready to use out of the box. Unpack your StripMeister and plug it in and begin stripping.
What type of grease should I use on my StripMeister E250?
We only use one type of grease on our StripMeister machines and the grease can be found at any local hardware store. The type of grease we use is a general purpose white grease that is low odor, non staining, NLGI grade 2 grease.
What is the most recommend way to secure the device to strip wire?
We recommend using the provided hardware to fasten your StripMeister to a work bench or table.
Can the StripMeister E250 strip Cat 5, Cat 6 or telephone wire?
Cat 5, Cat 5 and telephone wire are normally 22 and 20 gauge wire making it too small for the StripMeister E250 to strip. The smallest wire size the StripMeister E250 can do is #18 gauge wire.
How is the StripMeister E250 blade manufactured?
The StripMeister E250 blade is CNC machined.
What is the StripMeister E250 blade made of?
The StripMeister E250’s blade is made from heat treated and hardened tool steel for unbeatable quality.
How long will it take to receive my StripMeister E250?
With free shipping, we utilize a network of carriers to get your StripMeister the quickest to your location. You should receive your StripMeister E250 within 5 to 7 business days.